Bibliografía de apoyo para las UNIDADES DIDÁCTICAS I a IV
M. Pleguezuelos, Modelo de distribución de carga en engranajes cilíndricos de perfil de evolvente, Tesis Doctoral, UNED, Madrid, 2006.
M. Sánchez, Modelo de cálculo resistente de engranajes cilíndricos de alto grado de recubrimiento, Tesis Doctoral, UNED, Madrid, 2013.
JI Pedrero, M. Pleguezuelos, M. Artés, JA Antona, Load distribution model along the line of contact for involute external gears, Mechanism and Machine Theory, vol. 45, n. 5, pp. 780-794, 2010, doi:10.1016/j.mechmachtheory.2009.12.009.
JI Pedrero, M. Pleguezuelos, M. Muñoz, Critical stress and load conditions for pitting calculations of involute spur and helical gear teeth, Mechanism and Machine Theory, vol. 46, n. 4, pp. 425-437, 2011, doi:10.1016/j.mechmachtheory.2010.12.001.
MB Sánchez, JI Pedrero, M Pleguezuelos, Critical stress and load conditions for bending calculations of involute spur and helical gears, International Journal of Fatigue, vol. 48, pp. 28-38, 2013, doi:10.1016/j.ijfatigue.2012.11.015.
MB Sánchez, M Pleguezuelos, JI Pedrero, Enhanced model of load distribution along the line of contact for non-standard involute external gears, Meccanica, vol. 48, n. 3, pp. 527-543, 2013, doi:10.1007/s11012-012-9612-8.
MB Sánchez, JI Pedrero, M Pleguezuelos, Contact stress calculation of high transverse contact ratio spur and helical gear teeth, Mechanism and Machine Theory, vol. 64, pp. 93-110, 2013, doi:10.1016/j.mechmachtheory.2013.01.013.
MB Sánchez, M Pleguezuelos, JI Pedrero, Tooth-root stress calculation of high transverse contact ratio spur and helical gears, Meccanica, vol. 49, n. 2, pp. 347-364, 2014, doi:10.1007/s11012-013-9799-3.
M Pleguezuelos, JI Pedrero, MB Sánchez, Analytical expressions of the efficiency of standard and high contact ratio involute spur gears”, Mathematical Problems in Engineering, vol. 2013, 14 p. (Open Access), 2013, doi:10.1155/2013/142849.
M Pleguezuelos, MB Sánchez, JI Pedrero, Approximate equations for the meshing stiffness and the load sharing ratio of spur gears including hertzian effects, Mechanism and Machine Theory, vol. 109, pp. 231-249, 2017, doi:10.1016/j.mechmachtheory.2016.11.014.
M Pleguezuelos, MB Sánchez, JI Pedrero, On the evaluation of the meshing stiffness of external spur gears”, Proc. International Conference Power Transmissions 2020, Borovets (Bulgaria), 2020.
Bibliografía de introducción a la línea de investigación de Transmisiones avanzadas de engranajes
P Serradilla,Optimización de la caja de engranajes para servicios auxiliares del avión de combate EF-18, Proyecto fin de grado, UNED, Madrid, 2019.
R García-Berezo,Optimización en volumen de una reductora de dos etapas, Proyecto fin de máster, UNED, Madrid, 2020.
C Nutakor, A Klodowsky, J Sopanen, A Mikkola, JI Pedrero, Planetary gear sets power loss modeling: Application to wind turbines, Tribology International, vol. 105, pp. 42-54, 2017, doi:10.1016/j.triboint.2016.09.029.
JI Pedrero, M Pleguezuelos, MB Sánchez, Control del error de transmisión cuasi-estático mediante rebaje de punta en engranajes rectos de perfil de evolvente, Revista Iberoamericana de Ingeniería Mecánica, vol. 22, n. 2, pp. 71-90, 2018.
MB Sánchez, M Pleguezuelos, JI Pedrero, Influence of profile modifications on meshing stiffness, load sharing, and transmission error of involute spur gears, Mechanism and Machine Theory, vol. 139, pp. 506-525, 2019, doi:10.1016/j.mechmachtheory.2019.15.014.
JI Pedrero, M Pleguezuelos, MB Sánchez, Load sharing model for high contact ratio spur gears with long profile modifications, Forschung im Ingenieurwesen (Engineering Research), vol. 83, n. 3, pp. 401-408, 2019, doi:10.1007/s10010-019-00379-w.
M Pleguezuelos, MB Sánchez, JI Pedrero, Control of transmission error of high contact ratio spur gears with symmetric profile modifications, Mechanism and Machine Theory, vol. 149, 2020, doi:10.1016/j.mechmachtheory.2020.103839.
